Forums › Forums › Traffic Signals › IC4_14_0_0_1_1 Sending configs

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 6th April 2017 at 10:21 pm #3306
    Anonymous
    Inactive

    I have had issues both sending and receiving configs using IC4. However, IC4 Lite works perfectly every time. I use the Lindy USB serial lead.

    17th February 2017 at 4:49 pm #3303
    Andrew_B
    Participant

    I had heard that some of the USB serial convertors can have issues with some operations. The one I have been recommended is the Lindy part number 42812

    https://www.lindy.co.uk/usb-firewire-c4/usb-converters-c213/usb-to-serial-adapter-cable-25-way-rs-232-1-5m-p490

    which I have never had a problem with when communicating with controllers. Having said that; I’ve never had the need to send a config to a controller using it, so this advice may be no help at all!

    14th February 2017 at 12:52 pm #1074
    SiBox
    Participant

    Hi,

    I work in IT for our local council. We have just rolled out new laptops (Win 10 64bit) and we are having issues when sending configs to some controllers. Receiving is fine. We are using a USB to serial cables, which Siemens said might be the issue. I was wondering if anyone else has had success with USB serial cables?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.