Forums Forums Traffic Signals General Discussion Siemens UTC – Gemini 2 to PTC-1 Reply To: Siemens UTC – Gemini 2 to PTC-1

#3372
AvatarMickos
Participant

Hi Jo,

The default BAUD rate in the PTC-1 is 9600
It can be changed with the BDR command or via the Web Interface

You need the Correct RS232 Cable Form from Siemens that is wired for Loop-back as there is no handshaking in the Peek Controllers
667/1/26579/001

Also check the settings in the Gemini – See CBR Command